News Ticker-
Comparisons · Robot24.com Original

PUDU CC1 vs. UniRing MAX

PUDU CC1 and UniRing MAX are commercial autonomous cleaning robots designed for facility maintenance. Both feature wheeled mobility, LiDAR navigation and Wi-Fi connectivity. However, they differ in their recorded cleaning widths, operating endurance and commercial availability. We compare their cleaning capabilities, navigation systems, runtime and suitability for commercial environments.

pudu-cc1-vs-uniring-max

Introduction

Commercial facilities require cleaning of floors periodically to ensure proper conditions for the employees, visitors, and customers. The office building, shopping centers, hotels, and other big indoor facilities require periodic cleaning several times per day.

These operations could be supported by autonomous cleaning robots that can move in designated places and perform floor cleaning tasks with limited involvement of the operator. Still, all the commercial cleaning robots do not have the same features.

Such factors as cleaning width, endurance of batteries, navigation systems, and cleaning technique can influence the applicability of the robot in particular facilities.

PUDU CC1 and UniRing MAX are two commercial autonomous wheeled robots for cleaning of commercial facilities.

The PUDU CC1 is a Chinese autonomous commercial cleaning robot with sweeping and scrubbing modes. The cleaning width of this robot is 500 mm for sweeping and 400 mm for scrubbing and the working time is from four to nine hours depending on cleaning mode.

The UniRing MAX is a commercial wheeled unmanned ground vehicle developed by PLiBOT and marketed mainly in Japan. This robot has the cleaning width of 60 cm and operating time up to three hours.

Both platforms can move autonomously, possess LiDAR and Wi-Fi connections. However, their specifications show certain differences in such characteristics as cleaning width, operating endurance, and purchasing procedure.

At a Glance

Autonomous NavigationYesYes
AvailabilityCommercially availableOffered for purchase consultation by PLiBOT, whose sales are primarily limited to Japan. Availability in other territories, configurations and delivery terms require manufacturer/distributor confirmation.
Cleaning Width500 mm (sweeping), 400 mm (scrubbing)60 cm
LiDARYesYes
Mobility TypeWheeledWheeled UGV
NationalityChineseChinese
Runtime4–9 hours (mode dependent)Up to 3 h
Wi-FiYesYes
Typical useCleaning & Facility MaintenanceCleaning & Facility Maintenance
StatusCommercialCommercial

How They Compare

Product positioning and intended applications

PUDU CC1 and UniRing MAX are used for commercial cleaning and facility maintenance purposes. The commonality is that both robots facilitate routine floor-cleaning tasks in an indoor suitable environment.

The difference is that the specifications provided give different levels of information about the cleaning capabilities of the robots. PUDU CC1 facilitates sweeping and scrubbing; this makes it useful for facilities that require more than one type of floor-maintenance tasks.

UniRing MAX has a recorded cleaning width of 60 cm, although the provided specifications do not specify the cleaning method corresponding to this dimension. Both robots may be useful for commercial facilities, depending on the cleaning task to be done, floor type, and operating environment. In the comparison, the cleaning process is very important because all the functions performed by floor-cleaning robots are not the same.

Cleaning Methods

PUDU CC1 facilitates both sweeping and scrubbing. Sweeping refers to the collection of appropriate loose debris from the floor, and scrubbing refers to a different cleaning process in appropriate surfaces.

Both functions make CC1 useful for several types of floor-maintenance processes. UniRing MAX is classified under cleaning and facility maintenance. However, there is no specified cleaning method in the provided specification, although it can be either sweeping or scrubbing or some other cleaning process. It is very important to note that cleaning robots that use different cleaning methods cannot be compared directly.

Cleaning width

Cleaning width is one of the clearest differences between the two platforms. PUDU CC1 has a recorded sweeping width of 500 mm and a scrubbing width of 400 mm. UniRing MAX has a cleaning width of 60 cm, equivalent to 600 mm.

Based on these figures, UniRing MAX has a wider stated cleaning path. Its recorded width is 100 mm greater than CC1's sweeping width and 200 mm greater than CC1's scrubbing width.

However, these measurements may not represent equivalent cleaning functions. CC1's figures refer to specific operating modes, while UniRing MAX's measurement is not identified by cleaning method in the supplied records. A wider cleaning path may reduce the number of passes required across a suitable open floor. However, actual cleaning productivity also depends on movement speed, route planning, turning requirements and the cleaning mechanism. The available figures do not establish which robot cleans more floor area per hour.

Cleaning productivity

Cleaning productivity is an important consideration for facilities managing large floor areas. A robot's cleaning width can influence the amount of surface covered during each pass. However, cleaning width alone is not sufficient to calculate actual productivity.

The robot's operating speed, route efficiency, obstacle avoidance and cleaning requirements also influence the area completed. PUDU CC1 has recorded sweeping and scrubbing widths, while UniRing MAX has a stated 600 mm cleaning width. The supplied comparison does not include maximum cleaning-efficiency figures for either platform.

Consequently, it is not possible to establish which robot offers higher cleaning productivity using this table alone. A meaningful comparison would require measured area coverage under equivalent operating conditions.

Autonomous navigation

Both PUDU CC1 and UniRing MAX support autonomous navigation. Autonomous navigation allows compatible robots to move through designated areas without continuous manual steering.

This can support repeated cleaning operations in commercial environments.  However, autonomous navigation does not necessarily mean that every part of the cleaning workflow is automated. Staff may still need to prepare the cleaning area, replenish consumables, manage schedules or perform maintenance.

The supplied records do not identify the exact level of operational autonomy provided by either robot. A direct comparison would require evaluating their ability to complete equivalent cleaning routes.

LiDAR navigation

Both robots have LiDAR listed in their specifications. LiDAR uses laser-based distance measurements to help robots perceive their surroundings. In autonomous cleaning systems, LiDAR data can support mapping, localization and navigation.

This may help robots operate along designated routes in suitable indoor environments. However, the presence of LiDAR does not establish identical navigation performance. Sensor placement, mapping software and obstacle-avoidance systems can differ. The supplied records do not provide comparable LiDAR ranges, sensor configurations or navigation-accuracy figures. Therefore, neither robot can be considered superior in navigation based solely on the available data.

Obstacle detection and avoidance

Commercial cleaning environments may contain furniture, equipment, pedestrians and temporary obstacles. Autonomous cleaning robots need to respond appropriately to these conditions.

Both CC1 and UniRing MAX have LiDAR and autonomous navigation listed. These capabilities are relevant to environmental perception and route planning. However, the supplied records do not specify their complete obstacle-detection systems.

They also do not provide directly comparable detection ranges, response times or obstacle-clearance capabilities. A practical evaluation should examine how each robot handles moving people and unexpected obstacles along the same cleaning route.

Mobility type

PUDU CC1 is categorized as a wheeled robot. UniRing MAX is categorized as a wheeled unmanned ground vehicle, or UGV. Both therefore use wheeled ground mobility.

Wheeled platforms are suitable for many indoor cleaning environments with accessible floor surfaces. However, mobility performance depends on factors such as wheel configuration, turning radius, floor transitions and slope capability. The supplied records do not include these specifications. Consequently, the two robots' maneuverability cannot be directly ranked.

Maneuverability in commercial spaces

Commercial cleaning robots may need to navigate narrow passages, corridors and areas containing fixed equipment. PUDU CC1's sweeping and scrubbing widths provide some information about its cleaning footprint.

UniRing MAX's 600 mm cleaning width provides a comparable dimensional reference, although its exact cleaning method remains unspecified. However, cleaning width is not the same as the robot's overall body width. The physical dimensions and minimum passage requirements of both robots are not included in the supplied table.

It would therefore be inappropriate to conclude that either robot can navigate narrower spaces based only on cleaning width. Facilities should verify the robots' complete dimensions and minimum operating clearances.

Operating runtime

Battery endurance is one of the most important differences between the two robots. PUDU CC1 has a recorded runtime of four to nine hours, depending on operating mode.

UniRing MAX has a stated runtime of up to three hours. Based on these figures, CC1 offers longer recorded operating endurance. Even CC1's lower stated runtime of four hours exceeds UniRing MAX's maximum recorded figure by one hour. At its upper recorded runtime of nine hours, CC1 offers three times UniRing MAX's stated maximum duration. However, these figures may not have been measured under equivalent conditions.

Runtime can vary depending on cleaning mode, movement patterns, floor conditions and battery usage. The supplied records do not establish the exact operating conditions behind UniRing MAX's three-hour figure. Therefore, the difference should be treated as a comparison of stated endurance rather than verified performance under identical workloads.

Battery management

Battery management can influence how cleaning robots fit into a facility's daily operating schedule. PUDU CC1's recorded runtime of four to nine hours may allow longer operating periods between charging sessions. UniRing MAX's stated runtime of up to three hours may require more frequent charging during extended cleaning schedules.

However, operating endurance is only one part of battery management. Charging time, battery capacity and charging procedures also affect availability. The supplied comparison does not include these details for either platform. Consequently, it is not possible to determine their complete charging and operating cycles.

Wi-Fi connectivity

Both PUDU CC1 and UniRing MAX support Wi-Fi. Wireless connectivity can support compatible communication, configuration and management functions.

For facilities operating autonomous cleaning robots, network reliability may be important. However, Wi-Fi support alone does not establish identical remote-monitoring or cloud-management capabilities. The supplied records do not specify supported Wi-Fi standards, frequency bands or network requirements. Organizations should confirm compatibility with their existing network infrastructure before deployment.

Remote monitoring and fleet management

Remote monitoring can help facility managers oversee cleaning operations. Depending on the platform, compatible management software may provide information about robot status, cleaning progress and operational issues. Both PUDU CC1 and UniRing MAX support Wi-Fi, but the supplied comparison does not include detailed remote-monitoring specifications. Therefore, equivalent fleet-management capabilities should not be assumed. Facilities considering multiple robots should confirm whether the platforms support centralized monitoring, task scheduling and coordinated operation.

Commercial facility applications

Both robots are categorized under cleaning and facility maintenance. PUDU CC1's recorded sweeping and scrubbing capabilities may be relevant to commercial facilities requiring multiple cleaning functions. UniRing MAX's 600 mm cleaning width may be relevant to facilities seeking a wider cleaning path for its supported cleaning method.

However, the available data does not establish that the two robots are designed for identical floor types or workloads. Facilities should evaluate their requirements before selecting a platform. Relevant considerations include floor material, cleaning frequency, total area and the presence of obstacles.

Commercial availability

PUDU CC1 is listed as commercially available. UniRing MAX is offered for purchase consultation through PLiBOT. According to the supplied availability information, PLiBOT's sales are primarily limited to Japan.

Availability in other territories, configurations and delivery arrangements requires manufacturer or distributor confirmation. This difference may be important for businesses operating across multiple countries. Commercial status does not necessarily mean that a robot is immediately available in every region. Organizations should confirm regional sales, installation, spare-parts availability and after-sales support.

Maintenance requirements

Commercial cleaning robots require regular maintenance to support consistent operation. Depending on the cleaning mechanism, maintenance may include inspecting brushes, emptying waste containers, cleaning sensors and checking battery condition.

PUDU CC1's sweeping and scrubbing functions may involve different maintenance procedures. UniRing MAX's maintenance requirements depend on its exact cleaning configuration. The supplied records do not include comparable maintenance intervals, consumable costs or service requirements. These factors should be considered when evaluating long-term operating costs.

Deployment considerations

Before deploying either robot, facility managers should assess the intended cleaning environment. Important factors include floor type, total cleaning area, route complexity, operating hours and staff involvement.

PUDU CC1's longer recorded runtime may be relevant to facilities requiring extended cleaning periods. UniRing MAX's wider stated cleaning path may be relevant where its cleaning method is appropriate. However, the available specifications do not establish which platform would complete a particular cleaning task more efficiently. A practical evaluation should compare both robots under equivalent operating conditions.

Summary

PUDU CC1 and UniRing MAX are commercial wheeled cleaning robots designed for facility maintenance. Both support autonomous navigation, LiDAR and Wi-Fi connectivity. PUDU CC1 offers sweeping and scrubbing capabilities, with recorded cleaning widths of 500 mm and 400 mm, respectively.

Its operating runtime ranges from four to nine hours depending on the cleaning mode. UniRing MAX has a recorded cleaning width of 600 mm and a runtime of up to three hours. Based on the supplied figures, UniRing MAX has the wider stated cleaning path. However, the available data does not establish whether its cleaning width refers to the same cleaning function as either of CC1's measurements. PUDU CC1 has longer recorded operating endurance, with even its minimum stated runtime exceeding UniRing MAX's upper figure.

Commercial availability also differs.

CC1 is listed as commercially available, while UniRing MAX is offered through PLiBOT, with sales primarily focused on Japan. These differences do not establish an overall performance winner. The appropriate choice depends on cleaning method, floor type, operating schedule, regional availability and maintenance requirements.

This comparison is based on ROBOT24.com market-research data records rather than controlled performance testing. Cleaning productivity, runtime, navigation performance and commercial availability should be verified against current manufacturer documentation before drawing conclusions about overall performance.

Free Weekly

BUSINESS NEWS WEEKLY LETTER

The Weekly Letter for Robotics Professionals, Summarizing the Most Important Industry Moves, Launches, Deals and Signals.