News Ticker-
Comparisons · Robot24.com Original

PUDU CC1 Pro vs. KEENON KLEENBOT C40

PUDU CC1 Pro and KEENON KLEENBOT C40 are commercial cleaning robots designed for facility maintenance. Both support LiDAR, remote monitoring and multi-robot coordination, but differ in cleaning width, movement speed, charging time and cleaning efficiency. We compare their specifications and suitability for commercial environments.

pudu-cc1-pro-vs-keenon-kleenbot-c40

Introduction

Autonomous cleaning robots have become an integral component in commercial facility management, enabling businesses to handle repetitive floor cleaning activities within offices, hospitals, factories and other large indoor facilities.

However, there are variances between these cleaning robots concerning their physical specifications, cleaning capacity, duration of operation, as well as navigational technologies used by each robot. PUDU CC1 Pro and KEENON KLEENBOT C40 are two such commercial cleaning robots.

CC1 Pro is known to have a maximum cleaning rate of 700-1,000 m²/h, maximum speed of 1.2 m/s and five hours of scrubbing runtime. KLEENBOT C40 has a maximum cleaning rate of 1,100 m²/h, maximum sweeping width of 560 mm and five hours of scrubbing runtime.

Moreover, both robots can operate with the help of LiDAR, Wi-Fi connection, remote control and multi-robot collaboration. In this context, using data records from ROBOT24.com market-research, this article analyzes the features of the two commercial cleaning robots.

At a Glance

MetricPUDU CC1 ProKEENON KLEENBOT C40
Height69.5 cm690 mm
Runtime5 h ScrubbingUp to 5 hours Scrubbing
Weight75 kg70 kg
AvailabilityCommercially availableCommercially Available
Charging Time~3 hoursApproximately 2 hours
Cleaning Efficiency700–1000 m²/hUp to 1,100 m²/hour
Cleaning Width500 mm560 mm (Sweeping)
LiDARYesYes
Maximum Speed0.2–1.2 m/sApproximately 0.8 m/s
Minimum Passage Width700 mm65 cm
Multi-Robot CoordinationSupportedYes
NationalityChineseChinese
Remote MonitoringYesYes
Wi-FiYesYes
Typical useCleaning & Facility Maintenance, Healthcare, Manufacturing & Industrial OperationsCleaning & Facility Maintenance
StatusCommercialCommercial

How They Compare

Cleaning capabilities and efficiency

PUDU CC1 Pro and KEENON KLEENBOT C40 are commercial floor-cleaning robots intended to assist with automated cleaning operations.The CC1 Pro cleaning efficiency rate is recorded at 700-1,000 m²/h, while the maximum efficiency of C40 is listed at 1,100 m²/h.

Thus, the maximum cleaning-efficiency rate of C40 is 100 m²/h higher than the maximum cleaning-efficiency rate of CC1 Pro. Nevertheless, these numbers do not guarantee that the maximum cleaning efficiency rates were established within identical cleaning modes and testing procedures.

As the efficiency rates depend on floor surface, cleaning speed, obstacles and route planning, it cannot be concluded that the specified figures show that C40 is a more efficient cleaning machine.

Cleaning width

PUDU CC1 Pro has a recorded cleaning width of 500 mm. KEENON KLEENBOT C40 has a sweeping width of 560 mm. Accordingly, the cleaning path of C40 is 60 mm wider, which means that it is 12% wider compared to CC1 Pro.

A wider cleaning path may decrease the number of passages across the floor space. However, it should be noted that the width measurement of C40 relates to the sweeping cleaning mode while the CC1 Pro record does not specify the cleaning mode. Thus, the figures need to be checked before being regarded as equivalent.

Physical size and weight

PUDU CC1 Pro is 69.5 cm high and weighs 75 kg. KEENON KLEENBOT C40 is 690 mm (or 69 cm) high and weighs 70 kg. Accordingly, there is only 5 mm difference between their heights and C40 weighs 5 kg less. However, these features do not determine better maneuverability because the overall dimensions, the wheel configuration and turning radius are also important when moving in restricted commercial spaces.

Speed of movement and maneuverability

The speed range of PUDU CC1 Pro is recorded at 0.2-1.2 m/s. The maximum speed of KEENON KLEENBOT C40 is approximately 0.8 m/s. Accordingly, the maximum recorded speed of CC1 Pro is higher. However, the maximum traveling speed is not necessarily cleaning speed because robots may operate slowly when scrubbing, detecting obstacles or approaching pedestrians.

In addition, the minimum passage width required by these two models differs. PUDU CC1 Pro has a recorded minimum passage width of 700 mm while KEENON KLEENBOT C40 is listed at 65 cm or 650 mm.

Thus, C40 has a minimum passage width 50 mm wider. It may be relevant to facilities with narrow corridors or closely located equipment. However, the actual minimum passage width also depends on the turning radius and routing.

Navigation and obstacle detection

Both robots have LiDAR sensor which enables measuring the distance from the robots to other objects and thus, facilitates navigation. Such system helps robots to perceive and navigate the surrounding environment. However, the presence of LiDAR sensor does not ensure identical navigation performance because the locations of sensors, navigation and obstacle-avoidance software may differ.

There are no comparable navigation accuracy rates and obstacle detection range in the records provided. To compare the navigation performance of the robots directly, it is necessary to make them perform the same cleaning routes under equal conditions.

Battery endurance and charging

Both robots have a recorded scrubbing runtime of up to five hours. Thus, the endurance of robots in this cleaning operation is approximately the same. However, there are some differences in the charging time. While PUDU CC1 Pro needs about three hours to charge, C40 needs about two hours.

Accordingly, C40 requires one hour less for charging. It may be important for facilities that schedule several cleaning sessions during the day. However, it is necessary to consider the conditions of charging, battery capacity and operating load before comparing full duty cycles.

Multi-robot coordination

The two robots are capable of coordinating multiple robots. It may be useful for large commercial facilities which use several cleaning robots. Multi-robot system allows compatible robots to manage routes and avoid movement conflicts.

However, there is no information regarding the maximum number of robots that can be coordinated by each of them. Also, there is no information concerning the task allocation and traffic management functions of the robots.

These details should be confirmed before performing larger-scale operations.

Remote monitoring and connectivity

Both robots allow remote monitoring and use Wi-Fi. Remote monitoring allows managers to oversee the robot, track its status and solve operational issues.

Wi-Fi connection allows robots to communicate with management software and other connected systems. However, there is no information regarding the functions of remote monitoring in the records provided. A more complete comparison requires the information about cleaning reports, schedule, fleet dashboards and supported networks.

Applications in commercial setting

PUDU CC1 Pro is used for cleaning and facility maintenance, healthcare and manufacturing and industrial applications. These applications may have different cleaning schedules, floor surfaces and operational requirements. KEENON KLEENBOT C40 is used for cleaning and facility maintenance. Both applications may be relevant for commercial buildings which require floor cleaning. The maximum recorded speed of movement and application categories of CC1 Pro may be relevant for organizations that evaluate cleaning operations in various facilities.

The minimum passage requirement, charging time and maximum cleaning-efficiency figure of C40 may be relevant for facilities which prioritize these characteristics. However, the records provided do not allow to determine which robot performs better in specific floor surfaces and industrial conditions.

Availability and maintenance in commercial setting

PUDU CC1 Pro and KEENON KLEENBOT C40 are commercially available according to the records provided. However, stock availability, installation options and after-sales support may vary. Facilities need to find out information about distributors, warranty, replacement parts and maintenance requirements before buying.

Maintenance of the robots may include cleaning the cleaning components, managing water and waste systems, cleaning sensors and battery condition monitoring.

The records provided do not allow comparing maintenance schedules and operating costs of robots. These features should be taken into account in addition to the cleaning efficiency and purchasing price.

Summary

PUDU CC1 Pro and KEENON KLEENBOT C40 are commercial autonomous cleaning robots designed for facility maintenance. Both use LiDAR, Wi-Fi, remote monitoring and multi-robot coordination. Also, both have recorded scrubbing runtime of approximately five hours.

CC1 Pro has a higher recorded maximum movement speed (1.2 m/s) compared with C40's approximate maximum movement speed (0.8 m/s). C40 has a wider recorded cleaning path, a narrower minimum passage requirement and shorter charging time.

In addition, it has a higher maximum cleaning-efficiency figure (1,100 m²/h) compared with the upper CC1 Pro cleaning-efficiency rate (1,000 m²/h). However, these cleaning-related figures may be determined within different operating modes or testing procedures.

These differences do not determine the overall performance leader. CC1 Pro may be relevant for facilities which evaluate higher movement speed and cleaning applications in healthcare and industrial environments.

C40 may appeal to facilities which prioritize narrower passage access, shorter charging times and cleaning-efficiency capabilities. This comparison is based on ROBOT24.com market-research data records rather than performance testing.

 

Free Weekly

BUSINESS NEWS WEEKLY LETTER

The Weekly Letter for Robotics Professionals, Summarizing the Most Important Industry Moves, Launches, Deals and Signals.