News Ticker-
Comparisons · Robot24.com Original

UniRing MAX vs. KEENON KLEENBOT C40

UniRing MAX and KEENON KLEENBOT C40 are commercial cleaning robots designed for facility maintenance. Both support LiDAR, Wi-Fi and remote monitoring, but differ in cleaning width, operating endurance and fleet coordination. We compare their specifications, cleaning capabilities and suitability for commercial environments.

uniring-max-vs-keenon-kleenbot-c40

Introduction

The UniRing MAX and KEENON KLEENBOT C40 are two commercial cleaning robots utilized for maintaining the facilities. The UniRing MAX by PLiBOT is equipped with the cleaning width of 60 cm and operating time of up to three hours. The sales of the robot take place mainly in Japan.

The KEENON KLEENBOT C40 has the sweeping width of 560 mm, scrubbing operating time of up to five hours and coordination of multiple robots.

Both robots have LiDAR, WiFi and remote monitoring.

This analysis compares the capabilities of cleaning, working time, navigation and applicability in commerce and is based on ROBOT24.com market research data.

At a Glance

MetricUniRing MAXKEENON KLEENBOT C40
AvailabilityOffered for purchase consultation by PLiBOT, whose sales are primarily limited to Japan. Availability in other territories, configurations and delivery terms require manufacturer/distributor confirmation.Commercially Available
Cleaning Width60 cm560 mm (Sweeping)
LiDARYesYes
Multi-Robot CoordinationNot Publicly DisclosedYes
NationalityChineseChinese
Remote MonitoringSupportedYes
RuntimeUp to 3 hUp to 5 hours Scrubbing
Wi-FiYesYes
Typical useCleaning & Facility MaintenanceCleaning & Facility Maintenance
StatusCommercialCommercial

How They Compare

Cleaning capabilities and applications

UniRing MAX and KEENON KLEENBOT C40 are commercial robots designed to perform floor cleaning tasks at commercial facilities.

UniRing MAX has a recorded cleaning width of 600 mm, while the cleaning width of C40 is 560 mm.

Comparing to these figures, UniRing MAX has a 40 mm wider cleaning area, which is approximately 7.1% more than that of the sweeping width of C40.

However, these numbers cannot be directly compared because C40's figure indicates sweeping, and the cleaning method of UniRing MAX is not defined in the available specifications.

C40 has a runtime specification for scrubbing, which means that it can sweep and scrub. The difference in the cleaning width does not guarantee the higher performance since the cleaning speed, the route efficiency and conditions of floors matter. There are no available records for comparing their cleaning efficiency and the coverage rate during the hour.

Navigation and obstacle detection

UniRing MAX and KEENON KLEENBOT C40 are equipped with LiDAR that allows the use of laser technology to measure distances to objects and perceive the surrounding environment. With LiDAR, cleaning robots can navigate commercial facility areas. However, the presence of LiDAR in robots' configurations does not make their navigation features identical since the sensor settings, obstacle-avoidance algorithms and navigation software may be different. There are no comparable figures for detection ranges and navigation accuracy provided.

Operating runtime

One of the clear distinctions between these robots is the operating runtime.

According to the specifications, UniRing MAX works up to three hours, and KEENON KLEENBOT C40 works up to five hours while scrubbing. Comparing to the figures above, the maximum operating runtime of C40 is 2 hours more, which is approximately 67% more than the time provided for UniRing MAX. This may be important for the facilities that require long cleaning sessions.

However, the figures for UniRing MAX and C40 indicate the operating modes differently. It means that there is no way to compare their performance according to the provided information. The charging times and battery capacities are also not provided in the records.

Multi-robot coordination

C40 has multi-robot coordination ability. This feature may come in handy when several robots clean in large facilities where it is necessary to move around shared routes. Multi-robot coordination helps robots to control movement and avoid the intersection of the routes. Multi-robot coordination abilities of UniRing MAX have not been disclosed in the available records. However, this does not mean that the robot does not have this feature. It is not clear how many robots it can coordinate and what are the particular functions of the feature.

Remote monitoring and connectivity

Both robots have remote monitoring capabilities and Wi-Fi connectivity. These features allow facility managers to monitor the cleaning process remotely without constant supervision of each robot individually. Depending on the management software, remote monitoring may provide information about the status, the cleaning progress and alerts. However, the available records do not indicate which monitoring functions the robots can perform. Moreover, the records do not clarify whether the robots have equal reporting, scheduling and fleet management software features. Businesses should consider these issues along with the network requirements.

Commercial applications

Both robots belong to the category of cleaning and facility maintenance devices. Thus, they may be useful for the commercial properties that need cleaning of the floors regularly, such as offices, shopping centers and other commercial buildings.

The 600 mm cleaning width of UniRing MAX may be useful when this robot is suitable for the particular cleaning method. The scrubbing runtime and multi-robot coordination of C40 may be useful in facilities that require long cleaning sessions or several robots.

However, the suitability of robots depends on the type of floor, cleaning frequency, route complexity and working space. The available specifications do not allow determining which robot performs better in various situations.

Commercial availability

UniRing MAX can be bought for consultations through PLiBOT, and sales of this company are primarily restricted by Japan. The availability in other markets, configurations and delivery options should be clarified.

KEENON KLEENBOT C40 is mentioned to be commercially available. However, it is still necessary to verify the regional availability, installation services and after-sales support of the robot. Organizations that work in several regions may consider the distribution availability, maintenance services and spare parts provision when buying robots.

Maintenance and deployment requirements

Routine maintenance of robots is needed to keep them operating properly. Depending on the cleaning system, maintenance may include checking brushes, sensors cleaning, waste managing and battery condition checking.

According to the recorded sweeping and scrubbing parameters of C40, maintenance requirements related to these processes are possible. The maintenance requirements of UniRing MAX depend on the cleaning system used. The available records do not contain comparable maintenance intervals, operating costs and consumables requirements. These aspects should be taken into account in addition to cleaning performance and purchasing arrangements.

Summary

UniRing MAX and KEENON KLEENBOT C40 are commercial robots used for cleaning and facility maintenance. Both of them have LiDAR, Wi-Fi and remote monitoring capabilities.

The cleaning width of UniRing MAX is 600 mm, and the operating runtime is up to three hours.

The sweeping width of C40 is 560 mm, and the scrubbing runtime is up to five hours. In addition, the robot has the ability to coordinate several robots. According to the figures above, the cleaning path of UniRing MAX is wider, although the cleaning methods are not comparable. C40 has longer runtime and multi-robot coordination ability, but these differences do not determine which robot performs better.

UniRing MAX may be useful in the case when facilities evaluate the cleaning method. PLiBOT distributes UniRing MAX in Japan.

However, C40 may fit for organizations that need longer scrubbing endurance and coordinated cleaning operations.

 

Free Weekly

BUSINESS NEWS WEEKLY LETTER

The Weekly Letter for Robotics Professionals, Summarizing the Most Important Industry Moves, Launches, Deals and Signals.